Vectec Fuel and Equipment Catalogue 2013 - page 165

Heating Oil & Fuel Tank Equipment
DETECT.M
OWT
FV.1.FF
FVT
Pipe Detector Mesh
- Lay above buried plastic pipework.
- Can be detected with a cable detector to warn of pipes below.
- 150mm wide x 100m long rolls.
- Printed along the length reads
‘Caution - fuel pipe below’
.
Oil Line Warning Tape
- Lay above buried pipework.
- 75mm wide x 50m long rolls.
- Reads
‘Caution - Oil Pipeline Below’
.
- Master carton box quantity 16.
Free Fall Fire Valves
- Suitable for installation in either horizontal or vertical pipework.
- Are designed to provide a positive 100% shut off when used
as a fuel isolating valve, or opening when used as a dump valve.
- This assembly comprises of: 1” BSPF valve, lever, weight & fitting kit.
- Manufactured in cast iron.
- May be actuated mechanically or electronically.
- Suitable for fuel oils & gases @ pressures of up to 203 psi (14 bar).
Fire Valve Tester - Electronic
- At last a safe, reliable fire valve tester. 230V.
- Set the unit to the required temperature, 0 - 120°C.
(add 10% to allow for tolerance on the trip point).
- Turn on the unit & allow to warm up, an amber light will come
on when the required temperature is reached.
- Insert the valve sensor into the test unit.
- Max. sensor dia 14.5mm. Max. sensor length 150mm.
- Allow 5 minutes, then check to see if the valve has tripped.
H
Stk Code Description
List
FVT
Fire valve tester
246.00
Stk Code Description
List
FV.1.FF
1” free fall fire valve kit
399.85
Stk Code Description
List
OWT
Warning tape (50m roll)
13.71
Stk Code
Description
List
DETECT.M
Detection mesh, 100m
307.54
1...,155,156,157,158,159,160,161,162,163,164 166,167,168,169,170,171,172,173,174,175,...234
Powered by FlippingBook