Vectec Fuel and Equipment Catalogue 2013 - page 183

Heating Oil & Fuel Tank Equipment
63/50mm pipe
50mm pipe
UPP Pipework System
Installation & technical specification
- Bend radius 1.5m (5ft). Can be used above ground.
- Pressure rated primary to 10 bar (145 psi) at 20°C.
- Pressure rated secondary to 4 bar (58 psi) at 20°C.
- Rupture pressure is 40 bar (600 psi).
- Recommended burial depth is a minimum of 300mm (12”).
- All trenches should be sloped back towards the tank with a
recommended gradient of 1:100. 15cm (6”) bed of backfill
material should be laid under the pipe. Acceptable backfill
material: Well-rounded pea gravel or well-graded sand, max
particle size 20mm (
3
/
4
”). No more than 3% of particles should
pass through a 2.5mm (
1
/
8
”) screen.
-
See pages 216 - 225 for more info on UPP pipework
.
UPP Single Containment
- UPP extra lined pipe features a tough, specially bonded nylon
liner. It comes in a variety of diameters & in either straight lengths
or coils.
Prices are per metre
.
UPP Secondary Containment
- The Secondary Containment system features a coaxial sleeve
pipe which is pre-fitted over UPP extra primary pipe enabling all
sizes of fuel & vapour lines to be installed with an uninterrupted
interstitial space between the dispenser or fill point with leak
detection connections if required.
Prices are per metre
.
H
40/32mm COMPRESSION TERMINATION
Stk Code
Description
List
U-01.32.LS (100)
32mm (1”), 100m coil
POA
U-01.50.LS(50
50mm (1
1
2
”), 50m coil
POA
U-01.50.LS(100
50mm (1
1
2
”), 100m coil
POA
U-01.63.LS(100
63mm (2”), 100m coil
POA
See page 220 for Gemini system
Stk Code
Description
List
U-01.40.32.LS(50)
40/32mm (1”), 50m coil
POA
U-01.63.50.LS(30
63/50mm (1
1
2
”), 30m coil
POA
U-01.63.50.LS(100
63/50mm (1
1
2
”), 100m coil
POA
U-01.75.63.LS(30
75/63mm (2”), 30m coil
POA
U-01.75.63.LS(50
75/63mm (2”), 50m coil
POA
1...,173,174,175,176,177,178,179,180,181,182 184,185,186,187,188,189,190,191,192,193,...234
Powered by FlippingBook