Vectec Fuel and Equipment Catalogue 2013 - page 185

A simple to install & easy to use ‘Secondary Containment’ pipe leak
detection system. It works by sealing the outer ‘Secondary
Containment’ pipe & the inner ‘Product’ pipe together. The join
between the two pipes is then monitored using a float switch sealed
into the sensor housing, fitted below the height of the join. Any fuel
that leaks will activate the float switch which is connected to a 230V
alarm (
Float switch not included with LS.KIT
).
Sensor housing kit
(LS.KIT)
- 1m of connector tube c/w valve & clip
(fits onto the pipework)
.
- Sensor housing pot must fit below the pipework
(float switch fits inside)
.
- Mounting bracket
(fits to the chamber wall)
.
Also required alarm box & float switch
- 230V alarm box c/w flashing beacon & sounder
(TA2.POW)
.
- Float switch comes with 5m of cable
(TA.F5)
.
-
For more information on this alarm see pages 178 - 179
.
Please note
The connector valve on the end of the tubing should be connected
to the test port on the secondary containment termination boot (this
is for pipework leak detection only). If no secondary containment
termination boot is used, the valve, tubing & gland that fits onto the
sensor housing pot should be removed completely, allowing the pot
to fill up, activating the float switch & alarm. If only 1 chamber & 1
sensor housing kit are to be used then they should be
mounted in the lowest point of the pipework run.
Heating Oil & Fuel Tank Equipment
CHAMB.650
TA2.POW
Underground Connection Chambers
- These solid bottomed GRP chambers are ideal for providing
accessible connection or termination points for all buried pipe,
as recommended in OFTEC TI/134.
- Comes complete with a non-load bearing cover & gasket.
Hytek Leak Detection Kit
H
Cable Encapsulation Kit
- Buried cable wire splice encapsulation kit.
- Use to connect cables within below ground chambers & ducts.
- Kit consists of barrel & sleeve, end caps & water resistant
encapsulation compound. Connects up to 5 pairs of cables.
GP.CONKIT
LS.KIT
Stk Code Description
List
LS.KIT
Sensor housing kit
110.77
TA2.POW
230V alarm box
204.85
TA.F5
Float switch
41.00
Engineered Product
Stk Code
Description
List
GP.CONKIT
Cable encapsulation kit
25.35
Stk Code
Description
List
CHAMB.650
650mm sq. chamber & lid
427.52
1...,175,176,177,178,179,180,181,182,183,184 186,187,188,189,190,191,192,193,194,195,...234
Powered by FlippingBook