Vectec - Total Fuel Management

Delta Fuel Management System - Multiple Pump Operation

 

The VECTEC DELTA is a simple yet sophisticated fuel management system, designed to provide complete control for commercial transport organisations dispensing fuel to authorised vehicles on site.

The VECTEC DELTA fuel management system comprises hardware and software. The hardware is a highly specified Fuel Access Control Terminal (FACT) designed to be installed at the fuelling location to control local or remote fuel pumps.

 Delta Fuel Management SystemVECTEC FM reporting and control software is a Microsoft Windows based package which can run on any Windows 32 bit platform.

The VECTEC DELTA fuel management system uses Datatag as the access method for authorisation to use the fuelling facility.

VECTEC DELTA - Specification

The VECTEC DELTA can control up to four external fuel pumps per fuel management system and is available in either pedestal or wall mounted options. It can be networked together with other Deltas to control multiple pumps.

The VECTEC DELTA fuel management system incorporates a telephone style keypad which enables odometer readings, driver ID's, fleet numbers etc. to be entered at the point of fuelling.

Access method

The VECTEC DELTA uses a Datatag as the access method. The Datatag we use is a read/write tag, incorporating high security authentication using a cryptographic algorithm and a guaranteed 100,000 read/write cycles minimum. Data retention is 10 years minimum. The advantages of the Datatag are that there are no moving parts, therefore maintenance is low, saving costs in the long term, on the upkeep of the system. Datatags supplied are guaranteed for the life of the system. The Datatag is a read/write device and can be programmed with many operating parameters. It can be programmed at the Fuel Access Control Terminal (FACT) or at the PC.

DATATAG is reliable, robust and easy to use

Datatag for DELTA

Delta base fixing locations

Construction                                                                   

The VECTEC DELTA fuel management system is manufactured entirely from stainless steel. The unit is sturdy, robust and designed to operate in harsh environments.

Reporting

For reporting purposes data is downloaded from the FACT via a communication link to an existing central PC running Windows based VECTEC FM software. The software allows reports to be viewed and/or printed from an existing PC/printer set up.

The VECTEC DELTA fuel management system incorporates vehicle/driver messaging. A message can be programmed at the VECTEC FM software and sent to the FACT. The next time the relevant datatag is used at the FACT a message will be displayed.

This fuel management system has a memory capacity of 2,000 transactions between downloads to the PC. These are stored in non-volatile memory that does not require a battery back-up. This means that even in the event of a mains power fail the system will retain all data.

The VECTEC DELTA incorporates a backlit, wide viewing angle graphic display.

Communcations 

The VECTEC DELTA fuel management system can support a number of communication methods.

Direct Wire - RS485, RS232, -GSM Modem - Serial Modem - Radio Modem - Network Interface allowing the VECTEC DELTA to form part of a LAN/WAN.

VECTEC has improved on the standard for data download. The traditional method of dealing with a fuelling transaction once it has been down-loaded to a PC, has been to delete it from the FACT. The VECTEC DELTA identifies all transactions as having been downloaded and stores them at the FACT, enabling fuelling transactions to be downloaded again in the event of a PC failure.

Contact us for further details of the VECTEC DELTA or to find out about our other available fuel management systems.

Click here to print or download an information leaflet about the VECTEC DELTA Fuel Management System

 
© Vectec 2009     Site Map
Designed by Webs For Everyone
Site designed with W3C valid XHTML 1.0 TransitionalSite designed with W3C valid CSS